Category
The Kencove PD8 Post Driver is durable and reliable.
When driving 4x4 or 6x6 square posts, we recommend drilling a pilot hole to help keep the post straight. You can also use the back corner of the beam as a guide for the post to help keep it straight.
NOTE: Some assembly is required.
- Drives steel posts, wood posts, and railroad ties up to 7⅛" diameter X 10' tall
- 30,000 pounds of impact at full stroke
- Hydraulic tilt features: 15-degree front-back and 15-degree side-side
- Mounting bracket included
- Rear-mounting options are equipped with Category I and Category II 3-point hitch
- Hydraulic requirements: minimum 3-4 GPM @ 1,500 PSI to operate
When driving 4x4 or 6x6 square posts, we recommend drilling a pilot hole to help keep the post straight. You can also use the back corner of the beam as a guide for the post to help keep it straight.
NOTE: Some assembly is required.
| Hammer | 360 lbs (spring-powered) |
|---|---|
| Impact | 30,000 lbs |
| Tilt Front/Back | 15°/15° |
| Side/Side Tilt | 15°/15° |
| Hydraulic Requirements | 3-4 GPM @ 1,500 PSI |
| Controls | Hydraulic, Tilt - Front/Back, Tilt - Left/Right |
| Max Post Height | 10' |
| Max Post Diameter | 7 1/8" |
| Storage Height | 7'6" |
| Mount Options | Skid Loader, Tractor Front, Tractor Rear |
| Weight | 458 |
| Additional Handling | No |
| Unit of Measure | EACH |
video title
video content