Kencove PD12 Post Driver

Be the first to review this product

Availability: In stock

$5,975.00

  • Drives steel posts, wood posts, and railroad ties up to 10⅛" diameter X 10' tall
  • 100,000 pounds of impact at full stroke
  • Hydraulic tilt features: 20-degree front-back and 25-degree side-side
  • Mounting bracket included
  • Rear-mounting options are equipped with Category I and Category II 3-point hitch
  • Hydraulic requirements: minimum 5 GPM @ 2,000 PSI to operate
Made by Shaver Manufacturing, the Kencove PD10H Post Driver is durable and reliable.

  • Drives steel posts, wood posts, and railroad ties up to 10⅛" diameter X 10' tall
  • 100,000 pounds of impact at full stroke
  • Hydraulic tilt features: 20-degree front-back and 25-degree side-side
  • Mounting bracket included
  • Rear-mounting options are equipped with Category I and Category II 3-point hitch
  • Hydraulic requirements: minimum 5 GPM @ 2,000 PSI to operate

When driving 4x4 or 6x6 square posts, we recommend drilling a pilot hole to help keep the post straight. You can also use the back corner of the beam as a guide for the post to help keep it straight.

NOTE: Some assembly is required.
Hammer None
Impact 100,000 lbs
Tilt Front/Back 20°/25°
Side/Side Tilt 20°/25°
Hydraulic Requirements 15 GPM @ 2000 PSI
Controls Hydraulic, Tilt - Front/Back, Tilt - Left/Right
Max Post Height 10'
Max Post Diameter 10 7/8"
Storage Height 9'
Mount Options Tractor Rear
Weight 929
Additional Handling No
Unit of Measure EACH

Write Your Own Review

Only registered users can write reviews. Please, log in or register