Kencove PD10 Post Driver

Be the first to review this product

Availability: In stock

$2,995.00

  • Drives steel posts, wood posts, and railroad ties up to 8¾" diameter X 10' tall
  • 71,500 pounds of impact at full stroke
  • Manual tilt features: 15-degree front-back and 15-degree side-side
  • Mounting bracket included
  • Mounting options: front/rear/skid-steer
  • Hydraulic requirements: minimum 12 GPM @ 1,500 PSI to operate
The Kencove PD10H Post Driver is durable and reliable.

  • Drives steel posts, wood posts, and railroad ties up to 8¾" diameter X 10' tall
  • 71,500 pounds of impact at full stroke
  • Manual tilt features: 15-degree front-back and 15-degree side-side
  • Mounting bracket included
  • Mounting options: front/rear/skid-steer
  • Hydraulic requirements: minimum 12 GPM @ 1,500 PSI to operate

When driving 4x4 or 6x6 square posts, we recommend drilling a pilot hole to help keep the post straight. You can also use the back corner of the beam as a guide for the post to help keep it straight.

NOTE: Some assembly is required.
Hammer 725 lbs (spring-powered)
Impact 71,500 lbs
Tilt Front/Back 15°/15°
Side/Side Tilt 15°/15°
Hydraulic Requirements 12 GPM @ 1500 PSI
Controls Tilt - Front/Back, Tilt - Left/Right
Max Post Height 10 ft
Max Post Diameter 8 3/4"
Storage Height 8'6"
Mount Options Skid Loader, Tractor Front, Tractor Rear
Weight 664
Additional Handling No
Unit of Measure EACH

Write Your Own Review

Only registered users can write reviews. Please, log in or register