Kencove PD8 Post Driver

Be the first to review this product

Availability: In stock

$1,995.00

  • Drives steel posts, wood posts, and railroad ties up to 7⅛" diameter X 10' tall
  • 30,000 pounds of impact at full stroke
  • Manual tilt features: 15-degree front-back and 15-degree side-side
  • Mounting bracket included
  • Rear-mounting options are equipped with Category I and Category II 3-point hitch
  • Hydraulic requirements: minimum 3-4 GPM @ 1,500 PSI to operate
The Kencove PD8 Post Driver is durable and reliable.

  • Drives steel posts, wood posts, and railroad ties up to 7⅛" diameter X 10' tall
  • 30,000 pounds of impact at full stroke
  • Manual tilt features: 15-degree front-back and 15-degree side-side
  • Mounting bracket included
  • Rear-mounting options are equipped with Category I and Category II 3-point hitch
  • Hydraulic requirements: minimum 3-4 GPM @ 1,500 PSI to operate

When driving 4x4 or 6x6 square posts, we recommend drilling a pilot hole to help keep the post straight. You can also use the back corner of the beam as a guide for the post to help keep it straight.

NOTE: Some assembly is required.
Hammer 360 lb (spring-powered)
Impact 30,000 lbs
Tilt Front/Back 15°/15°
Side/Side Tilt 15°/15°
Hydraulic Requirements 3-4 GPM @ 1500 PSI
Controls Tilt - Front/Back, Tilt - Left/Right
Max Post Height 10 ft
Max Post Diameter 7 1/8"
Storage Height 7'6"
Mount Options Skid Loader, Tractor Front, Tractor Rear
Weight 410
Additional Handling No
Unit of Measure EACH

Write Your Own Review

Only registered users can write reviews. Please, log in or register