Made by Shaver Manufacturing, the Kencove PD10H Post Driver is durable and reliable.
- Drives steel posts, wood posts, and railroad ties up to 10⅛" diameter X 10' tall
- 100,000 pounds of impact at full stroke
- Hydraulic tilt features: 20-degree front-back and 25-degree side-side
- Mounting bracket included
- Rear-mounting options are equipped with Category I and Category II 3-point hitch
- Hydraulic requirements: minimum 5 GPM @ 2,000 PSI to operate
When driving 4x4 or 6x6 square posts, we recommend drilling a pilot hole to help keep the post straight. You can also use the back corner of the beam as a guide for the post to help keep it straight.
NOTE: Some assembly
is required.